Volver

Elevadores telescopicos - Cobra

Elevadores telescopicos - Cobra

Crop handling

Descripción

Flujo regular, respeto de la mercancía.

Los ingeniosos elevadores telescópicos de AVR se caracterizan por su capacidad y por su preservación del producto. Ellos están particularmente bien adaptados a la descarga rápida y eficaz de los diferentes productos tales como patatas, cebollas y los granos. 

 

Toda nuestra gama de máquinas de almacenamiento está fabricada en nuestra filial de producción en Veendam (Paises Bajos). Haga aquí para dar un vistazo entre bastidores.

 

Especificaciones

Elevadores telescopicos - Cobra

Activos Strengths

Strengths information

  • Un transportador forma de V: capacidad elevada y cuidadosa con el producto
  • Un perfil en forma de empujadores altos en la banda de transporte
  • Un chasis robusto del tipo MONOCOQUE
  • Un cuello de cisne en el extremo superior del transportador
  • Un accionamiento doble (motores tambor Van der Graaf) impidiendo cualquier patinaje de la banda
  • Un gancho de acoplamiento orientable y elevable
  • La máquina es fácilmente accesible para su mantenimiento y control
  • Almacenamiento respetuoso con el producto gracias a una altura de caída mínima y un aprovisionamiento constante de patatas
  • Llenado semiautomático gracias a los sensores de pared y de producto
  • Un motor por rueda asegurando en toda circunstancia el desplazamiento

Activos Models

Models information

Cobra 80-15 Cobra 80-17 Cobra 80-19
Length (m) 15 17 19
Conveyor belt width (m) 0.80 0.80 0.80
Power belt drive 1x 5.5 kW 2x 4.0 kW 2x 4.0 kW
Belt speed 32– 126 m/min 32– 126 m/min 32– 126 m/min
Feed height max. (m) 1.06 1.06 1.06
Feed angle max.
Delivery height min.
Entry height
Drive (kW) 9.2 11.7 11.7
Capacity at 110m/min
Track width (m) 2.59 2.59 2.59
Weight (kg) 5,340 5,930 6,180
Activos Standard equipment

Standard equipment information

  • Robust hitch with double lip, easily demountable
  • Swiveling PU support wheels for transport
  • Pivots on the tires (285/70R19.5)
    • both hydraulic driven, with disengagement for freewheeling in transport
    • from transport to pivot positions by means hydraulic cylinder
  • Rubber funnel
  • Rubber conveyor belt supported by V‐shaped rollers
  • High cleats (15 mm) with good take out effect on potatoes
  • V‐shaped conveyor
  • 80‐17 / 80‐19: Driven by 2 VanderGraaf drum motors (2 x 4kW)
  • 80‐15: Driven by 1 VanderGraaf drum motor (1 x 5,5kW)
  • Drum motors with slight rounding and coated on the drum
  • Automatic steering system conveyor
  • Scraper on pulley and tensioner drummotor above and below
  • V‐shaped scraper in conveyor
  • Adjustable angled section (0‐20°) on the top of conveyor (L 1,50m)
  • Hydraulics:
    • Pump unit for drive wheels (proportional), swivel <‐> riding position, conveyor up / down
  • Electrical:
    • Necessary power supply 3x400V + PE, 50 / 60HZ, 32A
    • Electric motors for driving hydro unit (2.2 kW), conveyor (drum motors), in and extending
    • Frequency control on conveyor
  • Sensors:
    • Encoder at pivot ‐> record teach‐points
    • Inductive sensor: measuring limit slide in and out
    • Pressure sensors: supply pressure and wheel motors
  • Operation:
    • Electrical cupboard with incoming plug 32A + phase changer
    • features: start‐stop and reset (with light indicator), emergency stop, buzzer
    • LC: 13‐pin connector for coupling to other machines
    • 5" touch display and wired keypad (10m)
    • 5" display for all controls, information and fault codes
    • Keypad: 15 functions + emergency stop:
      • conveyor on/off, speed conveyor, conveyor up/down, conveyor in/out, manual/auto turn<‐>driving position, swivel left/right, drive left/right wheel‐ front/rear, teach positions and a selection button.
  • Automatic function standard machine:
    • Limitation left right by setting teach‐points
    • Wait and retract at teach point
    • Safety on overpressure on wheel motors

Activos Options

Options information

Mechanic

  • Folding wheel protection
  • Coupling part for twin conveyor
  • Scraper set / scrapers on all carrier rollers
  • Rubber rings on all rollers

Electro‐hydraulic

  • 2 LED work lights on top fixed part elevator
  • Switched socket (400V)
  • Radio remote control with emergency stop (tiger)
  • Line Control cable 15m

AUTO I (wall detection)

  • 2 laser sensors for wall detection (detecting distance adjustable)
  • additional mechanical safety (flippers)

AUTO II (wall detection):

  • 2 laser sensors for wall detection (detecting distance adjustable)
  • additional mechanical safety (flippers)
  • 2 adjustable ultrasonic sensors for product detection (swivel if product is seen)
  • absolute encoder and angle sensor for conveyor extension and height measurement:
    • pivot between virtual walls
    • height adjustment for filling last layer
    • corner filling

Media (2 archivos)

Crop handling

Vídeos

Download Center