Multivator
Multivator
Soil cultivators
Description
Perfect seed bed, maximum yield
When cultivating potatoes, the preparation of the seed bed is crucial. A good soil structure ensures a good water management and temperature in the ridge, which in turn have a positive influence on the tuber setting and prevent tuber deformation. Also important: an optimal crumbling while planting is the first step towards a successful harvesting season; in comes the AVR Multivator!
TIP: By creating small ridges in front of the tractor and installing subsoiler wheels on the tractor, it is possible to plant in non cultivated soil at the rear.
Cultivating grassland, soil preparation in front of the tractor for sowing wheat or planting Brussels sprouts, seed bed preparation for potatoes… The Multivator can do it all!
Perfect seed bed
The Multivator was designed as a replacement for the power harrow for potato planting. The advantages of the front cultivator are quite clear:
- Uniform crumbling (100 hook tines): no dust, no clods.
- No chance of smearing underneath the ridges, making it possible to plant earlier in the season.
- A higher capacity with a lower fuel consumption.
By creating small ridges in front of the tractor and installing subsoiler wheels on the tractor, it is possible to plant in noncultivated soil at the rear.
Specifications
Multivator
- Uniform crumbling (100 hook tines): no dust, no clods.
- Early planting: no chance of smearing underneath the ridges, making it possible to plant earlier in the season.
- High capacity: field tests have shown that the Multivator allows for a higher yield (up to 20%), a larger number of tubers and a more uniform size of the harvested product.
- Lower fuel consumption: work deeper using less power when compared to a power harrow. The 3 speed gear-box allows to adapt to the field conditions.
- Lower maximum required power: the hook tines are mounted in helix shape so their impact is continuous at all times, avoiding any peak loads.
- Healthy potatoes: thanks to the high amount of loose soil, you create the perfect internal ridge height.
- No caking on the cover: the cover is mounted using ten springs, making it move continuously.
- Flexible: the three point hitch can easily be adjusted, so the machine can be used at the front and back of the tractor
| Farmer 4x75 | HD 4x75 | HD 4x90 | |
| Working width (mm) | 3088 | 3088 | 3700 |
| Number of tines | 100 (40x10 mm) | 100 (50x12 mm) | 128 (50x12 mm) |
| Weight (kg) | 1,400 | 1,700 | 2,000 |
| Dimensions (l x w x h in m) | 1.75 x 3.30 x 1.20 | 1.40 x 3.40 x 1.20 | 2.70 x 3.95 x 1.30 |
| Required kW/hp (min.) | 140 | 160 | 180 |
Multivator Farmer 4 x 75
- PTO with shearing bolt link
- Levelling plate with V-shaped noses
- V spiral roller for front mount
- 2 depth control wheels (pneumatic tire 175/70R13)
- 100 welded hook tines (40 x 10 mm)
- Spring-mounted self-cleaning cover
- 3 speed gear-box with continuous axle (3 V) (<160 hp)
- Side drive via HD roller chain (1 ¾”)
Multivator HD 4 x 75
- PTO with cam clutch (2,250 Nm)
- Reinforced frame
- Levelling plate with V-shaped noses
- V spiral roller for front mount
- 2 depth control wheels (pneumatic tire 175/70R13)
- 100 welded heavy hook tines (50 x 12 mm)
- Spring-mounted self-cleaning cover
- 3 speed gear-box with continuous axle (3 V) (<250 hp)
- Side drive via sprocket gearbox (+ counter weight)
Multivator 4 x 90
- PTO with cam clutch (2,250 Nm)
- Levelling plate with V-shaped noses
- V spiral roller for front mount
- 2 depth control wheels (pneumatic tire 175/70R13)
- 128 welded heavy hook tines (50 x 12 mm)
- Spring-mounted self-cleaning cover
- 3 speed gear-box with continuous axle (3 V) (<250 hp)
- Side drive via sprocket gearbox
Multivator Farmer 4 x 75
- Equalisation bar before spiral roller
- WIDIA hook tines iso standard (4x75) (40x10 mm)
- Ridging hood 4x75 iso fullfield (not for use as interrow cultivator)
- Extra set depth control wheels (air)
- Cleaning system for vibrating hood, with hydraulic cylinders
- Roadlights with warning signs
- Extra parts needed to mount spiralroller behind the multivator
- Camclutch for Multivator (2250 Nm)
- V-spiral roller in suppl. Delivery
- 3th point linkage to mount on tractor with short front arms
Multivator HD 4 x 75
- Equalisation bar before spiral roller
- WIDIA hook tines iso standard (4x75) (50x12 mm)
- Extra set depth control wheels (air)
- Cleaning system for vibrating hood, with hydraulic cylinders
- Roadlights with warning signs
- Extra parts needed to mount spiralroller behind the multivator
- V-spiral roller in suppl. Delivery
- Cooling gearbox oil
- 3th point linkage to mount on tractor with short front arms
Multivator HD 4x 90
- Equalisation bar before spiral roller
- WIDIA hook tines iso standard (4x90) (50x12 mm)
- Cleaning system for vibrating hood, with hydraulic cylinders
- Roadlights with warning signs
- Extra parts needed to mount spiralroller behind the multivator
- V-spiral roller in suppl. Delivery
- 3th point linkage to mount on tractor with short front arms
Media (2 files)
Soil cultivators
-
GE-Force
Soil cultivators
explore